Flip Cover Fit Guide: How to Order the Right One for Your Exact Phone Model
Quick Summary (September 2026)
- Flip covers are cut for a specific model, not a series. A Vivo Y300 and a Y300 Plus need different covers despite the shared name.
- The three things that go wrong most often: a camera cutout in the wrong place, a body size mismatch of a few millimetres, and a magnetic clasp that sits over the wireless charging coil.
- Check the exact model name in Settings or on the retail box before ordering — marketing names and internal model names often differ.
- Royal Star lists flip covers against individual models rather than series, so matching is a question of reading the title carefully.
Last updated: September 2026
Most case returns are not quality problems. They are fit problems — someone ordered a cover for the Pro when they own the base model, or for last year's version of a phone whose camera island moved by eight millimetres. The case arrives, the leather is fine, the stitching is fine, and the camera cutout sits squarely over the flash.
Flip covers are more sensitive to this than plain back covers, because they wrap the whole device rather than snapping onto the back. A back cover that is a millimetre off can still stretch on. A flip cover that is a millimetre off will not close flat, and the magnetic flap will not line up. This guide is about getting it right the first time.
Why the Same Series Name Means Different Cases
Phone brands reuse family names across bodies that are genuinely different objects. Within a single generation you will commonly find a base model, a Plus or Pro with a larger display and therefore a taller body, and sometimes a regional variant with a rearranged camera module.
The clearest example in our own catalogue: the Vivo Y300 5G and the Vivo Y300 Plus 5G are listed as two separate covers, because they are two separate phones. Same series, same year, different dimensions. The same applies to Redmi Note 14 against Note 14 Pro, and to Motorola's Edge 50 against the Edge 50 Fusion.
Occasionally the reverse is true and two differently-named phones share a chassis. Our Vivo V40E cover also fits the iQOO Z9s, and the Motorola Edge 50 Fusion cover also fits the Moto G85 5G, because those pairs are built on the same body. When that happens we say so in the product title — which is why reading the full title is worth the extra three seconds.
The Four-Point Fit Checklist
1. Confirm your exact model name. Open Settings, go to About phone, and read the model line. Do not rely on memory or on what the shop called it. If your phone came in a box you still have, the model is printed on the label.
2. Check the camera cutout shape, not just its position. Camera islands have moved from corner-mounted rectangles to centred pills to large circular modules, sometimes within a single generation. A cover cut for a vertical two-lens strip will not accommodate a square three-lens island even if the phone body is identical.
3. Think about the clasp. Most flip covers close with a magnetic tab. If you use wireless charging, check where that magnet sits — a clasp across the middle of the back can interfere with the charging coil. If you use a card slot, check whether the flap presses cards against the screen when closed.
4. Account for a screen protector. If you have already applied tempered glass, the flap needs to close over slightly more thickness than the bare phone. Full-glue protectors that sit flush are fine; thicker edge-to-edge protectors with raised borders occasionally cause the flap to sit proud. Our guide to applying tempered glass without bubbles covers getting that layer flat in the first place.
What to Look For in the Cover Itself
Once the fit is settled, a few build details separate a cover that lasts two years from one that lasts four months.
The inner shell matters more than the outer leather. The flip cover's outer material is what you see, but the inner cradle is what holds the phone. A moulded polycarbonate shell grips more reliably over time than a thin adhesive-backed tray, which loosens as the glue ages in Indian heat.
Check the hinge. The fold line is the highest-wear part of any flip cover. A reinforced or double-stitched spine will outlast a simple creased panel by a wide margin, because that is where repeated opening concentrates stress.
Decide about card slots honestly. They are convenient, and they add bulk and a pressure point against the screen. If you carry a wallet anyway, skip them.
Our flip covers range lists each cover against a named model precisely so you can check these details before ordering rather than after. For a broader comparison of case materials, our guide to silicone versus polycarbonate versus leather is a useful companion read.
Flip Covers In Stock at Royal Star
Each of these is cut for the model named in its title. Note the Y300 and Y300 Plus listed separately — that is the point of this whole article.
Which One Should You Pick?
Assuming the model matches, the decision comes down to how you actually use your phone — and flip covers are genuinely not right for everyone.
A flip cover suits you if you want the screen protected when the phone is in a bag or a pocket with keys, you take the phone in and out of a pocket many times a day, or you have previously cracked a screen. The flap is the only case type that puts a physical barrier over the display.
A flip cover does not suit you if you shoot a lot of photos — the flap has to be folded back every time, which is genuinely annoying at speed. It also adds real thickness, roughly doubling the phone's profile at the spine, and it makes one-handed use harder on larger phones. If you use wireless charging daily, the added layer plus a metal clasp can be a problem.
If you have decided a flip cover is not for you, that is a perfectly reasonable conclusion, and our post on whether flip covers are still worth buying in 2026 makes the case for and against in more depth.
Frequently Asked Questions
Will a flip cover for the base model fit the Plus or Pro version?
Usually not. Plus and Pro variants typically have larger displays and therefore taller, sometimes wider bodies, and often a rearranged camera module. Order the cover listed for your exact variant.
How do I find my phone's exact model name?
Open Settings, go to About phone, and read the model line. It is also printed on the retail box label. Marketing names and model numbers sometimes differ, so use what the phone itself reports.
Do flip covers interfere with wireless charging?
They can. The added thickness reduces efficiency, and a metal magnetic clasp positioned over the charging coil can block it entirely. If wireless charging is part of your daily routine, check where the clasp sits before buying.
Can I use a flip cover with a tempered glass screen protector?
Yes, in most cases. Full-glue protectors that sit flush with the display cause no issue. Thicker protectors with raised edges can occasionally stop the flap closing completely flat.
Final Thoughts
Getting a flip cover right is almost entirely a question of reading carefully before you order: confirm the model in Settings, match the camera cutout, and think about the clasp if you charge wirelessly. Those three checks take under a minute and prevent nearly every fit complaint we see.
Browse the full flip covers range to find the cover cut for your exact model, or explore our wider back covers collection if you would rather keep the front open.
Stay tuned to our blog for the latest mobile news, launch updates and accessory guides from Royal Star.